GameMate 2 Wireless Joysticks & Magic Voice Speech module

Posted on 14 January 2018 by Frank

14/01/2018

In January quit some interesting stuff came on Marktplaats, most of it went to the same buyer….which was willing to pay an exceptional price for some of it.

But…i got my second GameMate. First one I bought from Dion, for 10 euro’s since the original power supply was missing. Will put that one back on Marktplaats soon. Offered for this on 12,50 euro.

Second, from the same seller, for 40 euro’s (not sure if it’s a good deal. seems complete, but not quit in a mint condition):

Will collect this one in Amsterdam tomorrow after work.

 

Views: 122

Posted in Auctions and buying, My Collection | Tagged , | Leave a comment

Cat & Korsh Sound Digitizer

Posted on 14 January 2018 by Frank

14/01/2018

Was offered on Marktplaats. No manual and very neat box, checked with my other Cat & Korsh boxes..the text on the box of all three is in blue. Guess this one is just the cartridge, new box and printed manual? Not sure, but stopped when pricing went over my offer of 27 euro.

Last months two of them were offered on Marktplaats, so there will be a third I guess. Hopefully original and with manual!

Views: 203

Posted in Auctions and buying | Tagged | Leave a comment

Bought two Commodore sets – bad luck

Posted on 14 January 2018 by Frank

14/01/2018

Last December i bought on a Belgium auction site a C64c, with some games and a FC III…not clear on the pictures was, what I thought, a box from a FC III cartridge. Picked it up in Zoetermeer beginning of January. Bummer, just a damaged cardboard piece of probably the original box. C64c is working and I will be selling that one on Marktplaats again. Kept the games, nothing special but ok,  and will keep both boxed joysticks. Paid in total 82 euro’s for this one. Too much.

 

That same day I pickup the following in Cappelle aan den Ijssel. Not quit sure if everything was working, so i decided to go up there with a monitor and a test cartridge. Paid in the end 75 euro instead of 85, sound was not working of the breadbox. Wanted the cartridges and joysticks, will sell the rest again on Marktplaats. Nice guy, had a computer repair shop inside the local “kringloop winkel”, second hand shop. Met his supplier there, dealing in refurbished hardware and recycling of hardware. Quit some business, in dealing with large quantities of end-of-life hardware (storage, servers etc).

 

 

Views: 415

Posted in Auctions and buying, My Collection | Tagged , , , , , | Leave a comment

Missed buy: Final cartridge II and III boxed

Posted on 14 January 2018 by Frank

14/01/2018

Finally a Final Cartridge III boxed came on Marktplaats for auction, it’s like a ghost. It seems that plenty of FC III are available, but none of them came up for sale as a mint & boxed. There are absolutely no pictures to find on the internet, and I tried some facebook groups to find pictures with no luck. Bidding was between me and some lucky other collector..when pricing went up to 60 euro…i bailed out…Still not sure if i should have pushed the price up. You never know when another one will be available.

Second was a auction for a C128….with a FC II boxed! Never came across one in the last 6 months. Current bidding is at 200, and although i can sell the 128d immediately to another collector, I am not quit sure about pushing this one over the 200 🙁

Meaning i will not have the FCIII and FCII Boxed…for now 😉

 

 

Views: 268

Posted in Auctions and buying | Tagged , | Leave a comment

Bummer…power monitor send back to Australia

Posted on 2 January 2018 by Frank

I ordered beginning December two power monitors from Darren in Australia…You can use them in between your Commodore and the power supply to monitor the voltage and current. Handy, primary because the power supplies are not that stable after decades, and tend to fail..the main reason why so many Commodore 64 are on the market with broken IC’s! You can also plug them in your userport to monitor the power (but not giving any protection then).

Anyway…still after 6 weeks no arrival….today Darren contacted me that the Dutch postage have send the parcel back….#@()U_@)(U#%@{OJP@{Jo. What a waste of expensive postage costs. Have to find out why they send it back, since i never got any notification of the arrival in the first place. Not the first time Dutch postage “forgets” to drop a notification in your postbox at home.

Called PostNL…sorry…all the will do is notify the post delivery of a complaint that a parcel notification wasn’t left behind. Parcel was send back on the 8th of December.  The other option is that the send will contact Australian post to discuss resending with Dutch postage, and maybe you can get a discount on resending..what a shitty post delivery organization we’ve got in Holland. This the 3th incident in two months with delivery.

 

 

Views: 3504

Posted in Auctions and buying, My Collection | Tagged | Leave a comment

Mint 1541-II drive

Posted on 2 January 2018 by Frank

02-01-2018

Happy new year to all!  This year we spent new years eve with some good friends in the south of Holland, near Maastricht. Since i found a mint 1541-II drive in Hasselt, I decided that (too much joy  of my girlfriend) we should drive up there on the first of January to pick it up.

When you zoom out in Google…Hasselt is just near Maastricht….well it’s still an hour drive, with not much sleep and a hangover, but it was worth it. Frank sold his boxed 1541-II which he owned and was stored in his attic for decades. It was the only thing he had left, and it sure looks like just a new one. Absolutely undamaged box and styrofoam inside, the test disk still sealed, manual looks like new.  The only thing which is missing is probably the plastic bag of the disk itself, which should be there?

Take a look yourself, got this for 45 euro, and will be selling my less mint boxed version shortly on Marktplaats. Nice start for 2018. Will pick up some sets today from Zoetermeer and Cappelle aan den IJsel later on.

 

 

 

Views: 152

Posted in Auctions and buying, My Collection | Tagged | Leave a comment

C64c – old board edition – mint

Posted on 30 December 2017 by Frank

30 December 2017

Last addition to my collection this year. Just posted on Marktplaats, previous owner Peter from Zevenaar was selling his childhood Commodore. Within half an hour after the ad appeared I bought it for 50 euro’s, and did a quick pickup.

Although the cardboard box is missing, the Commodore itself is in a very good condition (and the warranty bill included) and came with a unbroken seal. Tested ok at home. Nice. Not much included, just the Commodore. I can remove this edition now from my wishlist then.

I already had one, but the housing had a reset button and there was some yellowing. Will sell that one on Marktplaats next week.

This early 64C edition came with the older “breadbox” main board,, after his release Commodore went further in cutting costs and used the smaller/newer main boards. Main difference is the use of the older keyboard type (where the characters are printed both on top as on the front, the newer keyboards they are printed on the top only). To check which motherboard there is you can check the cartridge port, there is the main fuse of the board. If you see the whole fuse, it’s the old board, if you just see the top of the fuse it is the newer board)

Views: 131

Posted in Auctions and buying, My Collection | Tagged | Leave a comment

Late Christmas gift from Amazon

Posted on 30 December 2017 by Frank

The holy bible of Commodore repairs. In mint condition Art Margolis “Troubleshooting & Repairing your Commodore 64”, and Robert C. Brenner, “Commodore 64 Troubleshooting and Repair Guide”. Last one is a previous public library book, which is not quit in mint condition. But hey, nice additions to the collection!

Views: 155

Posted in Auctions and buying, My Collection | Tagged | Leave a comment

Silver label’s on Ebay

Posted on 29 December 2017 by Frank

I know pricing on eBay is for specific items often 2 or 3 times of what it probably would do in the Netherlands. Currently there are two “silver labels” for sale.

One with a 326298 board for 700 euro, and a ku-14194 board for 750 euro. Guess that is quit a lot of money.

Same goes for any Commodore 64 SX and the Commodore 64 GS. First one priced between 450-700 euro, the GS easily hits the 1000 euro if boxed. But then again, a lot of these items are not sold directly, offers reappearing immediately after the auction ends.

Retro collecting madness.

 

 

Views: 5568

Posted in Auctions and buying | Tagged | Leave a comment

Silver board repair (KU-14194HB) Part 2 – I screwed up. Did I?

Posted on 29 December 2017 by Frank

After not been handling any de/soldering stations for over 20 year…why the hell did you think you can do nice and good repair immediately :). So i got my spare practice 64c board, which I am trying to desolder IC’s…with no professional results yet lol. Seems that there are different methods you can try….and found out that at least your must have a good eye sight. Which i’m not quit gifted with. Second, my current soldering station is insufficient..40w.

 

 

Anyway… opened the RF shield of the VIC housing yesterday. To find out that both capacitors had been leaking, and found a third one, C34, which was leaking as well. Cut them loose, cleaned the board with isopropanol and started with continuity testing the traces beneath the capacitors. All ok.

Since there are a lot more capacitors, tightly soldered against the board, there is no way to find out visually if they are leaking. Decided to replace them all. Tried to desolder the pins of the three caps I removed, still in the board…its not that easy as on all those YouTube video’s…haven’t successfully passed my desolder exam I guess. Gave up for now.

What more of a problem is, and it might be my own gentle fuckup, is a broken trace I found beneath the board, if you look carefully just above the shadow line in the middle.

That made me grumpy last night. To have my KU board, and well, replacing capacitors isn’t the issue, but a board with a trace to fix? And i probably did it myself in not carefully handling the board the last few days. On a second thought, if you look at the photo it looks like if someone on purpose interrupted that trace, it doesn’t look like accidental damage?

Well…did some continuity tests, and it seems that this trace won’t be flowing any juice anymore….

More repair work to do. For now I am going to get more capacitors….and  more practicing on my repair board.

 

 

 

 

Views: 2643

Posted in Miscellaneous, Repairs | Tagged , | Leave a comment